Banks Power 17-19 Ford F-250/F-350/F-450 6.7L Ram-Air Intake System with Oiled Filter

The best intake in its class. Designed for maximum air density gain giving you more power and better mileage. Proprietary filter sleeve provides superior airflow with best in class performance. Largest and least restrictive filter in its class. Unparalleled dirt capacity for more miles between cleaning. Retains stock battery location. When Banks engineers set out to design a Ram-Air intake for the 2017-19 Ford 6.7L Super Duty, they had one seemingly impossible challenge: to achieve higher air density at the turbo inlet than all competitors while keeping the airbox in the stock location behind the battery. As Power Stroke owners know, the battery is located near the front corner of the engine bay. This means air must pass above and/or below the battery to the airbox behind it. One of the competitors chose to relocate the battery by having the customer attach a piece of supplied angle-iron to the thin firewall, cantilevering it over the engine. In our opinion, the battery is much too heavy and poses a danger if it were to break loose and fall. After all, many trucks see off-road conditions. These requirements would set our Mechanical Engineering team on a year-long mission of design, research and development, and on and off-road testing. Key Features: 40% Air Density increase over stock. Power and MPG increase. EPDM rubber elbow with bellows and coolant hose rest. Forward-facing inlet integrates with stock inlet. Secondary air inlet draws the coolest air possible. Retains stock battery location. The proprietary sleeve provides superior airflow. Largest air filter in its class (Oiled: 1,065 sq-in surface area). Least restrictive air filter in its class. Unparalleled dirt capacity. 99% filtration. More miles between cleaning. Easy-to-clean filter. Simple installation Banks Ram-Air Oiled or Dry Filter, Cold Air Intake System for 2017-2019 Ford F250/F350/F450 6.7L Power Stroke 2017-2019 Ford F250/F350/F450 6.7L Power Stroke

• +49% Mass Air Flow Gain. 40% Density improvement at turbo
• Easy-To-Clean Filter

Enhance your 2017-2019 Ford F-250, F-350, or F-450 with the Banks Power Ram-Air Intake System, engineered for maximum airflow and performance. Designed to increase air density at the turbo inlet by up to 40%, this system delivers noticeable improvements in horsepower and fuel efficiency. The proprietary filter sleeve features a large, least restrictive filter with an oiled surface area of over 1,065 square inches, providing superior airflow and dirt capacity for longer service intervals. The intake maintains the stock battery position, avoiding the safety risks associated with relocating heavy components, and seamlessly integrates with the factory inlet system. The forward-facing inlet draws cooler, denser air from outside the engine bay, optimizing combustion efficiency and power output. Installation is straightforward, with all necessary components included, making it accessible for both professional and DIY enthusiasts. The durable EPDM rubber elbow with bellows ensures reliable operation under various conditions, including off-road use. This intake system is compliant with EPA standards and features a cleanable filter for sustained performance. Whether you're looking to boost your truck's power, improve mileage, or ensure a reliable upgrade, the Banks Ram-Air Intake System offers a high-performance solution tailored for the 6.7L Power Stroke engine. Its advanced design ensures maximum airflow gains while preserving the integrity and safety of your vehicle's original setup, making it an ideal choice for serious truck owners seeking both performance and reliability.

Features:

• 40% Air Density Increase: Provides significant gains at the turbo inlet for more power and better fuel economy

• Largest and Least Restrictive Filter: Over 1,065 sq-in surface area for superior airflow and dirt capacity

• Proprietary Filter Sleeve: Ensures high airflow and long service life with 99% filtration efficiency

• Stock Battery Location Retention: Maintains original vehicle layout for safety and convenience

• Cooler Air Intake: Secondary inlet draws outside air to improve density and engine performance

• Durable EPDM Rubber Elbow: Includes bellows and coolant hose rest for reliable operation

• Easy Installation: Designed for straightforward setup with all necessary components included

• EPA Compliant and CARB EO Number D-161-132: Meets environmental standards for emissions

• Optimized for Off-Road Use: Heavy-duty construction withstands off-road conditions

• Maintenance Friendly: Easy-to-clean filter with long intervals between servicing

Fits
Ford F-250 Super Duty King Ranch 2017
Ford F-250 Super Duty King Ranch 2018
Ford F-250 Super Duty King Ranch 2019
Ford F-250 Super Duty Lariat 2017
Ford F-250 Super Duty Lariat 2018
Ford F-250 Super Duty Lariat 2019
Ford F-250 Super Duty Limited 2018
Ford F-250 Super Duty Limited 2019
Ford F-250 Super Duty Platinum 2017
Ford F-250 Super Duty Platinum 2018
Ford F-250 Super Duty Platinum 2019
Ford F-250 Super Duty XL 2017
Ford F-250 Super Duty XL 2018
Ford F-250 Super Duty XL 2019
Ford F-250 Super Duty XLT 2017
Ford F-250 Super Duty XLT 2018
Ford F-250 Super Duty XLT 2019
Ford F-350 Super Duty King Ranch 2017
Ford F-350 Super Duty King Ranch 2018
Ford F-350 Super Duty King Ranch 2019
Ford F-350 Super Duty Lariat 2017
Ford F-350 Super Duty Lariat 2018
Ford F-350 Super Duty Lariat 2019
Ford F-350 Super Duty Limited 2018
Ford F-350 Super Duty Limited 2019
Ford F-350 Super Duty Platinum 2017
Ford F-350 Super Duty Platinum 2018
Ford F-350 Super Duty Platinum 2019
Ford F-350 Super Duty XL 2017
Ford F-350 Super Duty XL 2018
Ford F-350 Super Duty XL 2019
Ford F-350 Super Duty XLT 2017
Ford F-350 Super Duty XLT 2018
Ford F-350 Super Duty XLT 2019